I think im in tha right one

[N|ck]

i have 2 reds pumps and 4 dumps i just bought a 90 b2200 and it came with them kinda installed and they don't work but that guy assured me that they do and i would like to re wire them but i don't know how. there r 6 solenoids 4 deep cycle batts 8 switches. i want to start from scratch on wiring so any help would be great...


Thanx N|ck

[Guest_Hydros]

Heck, I've been offline for a few days. What moves do you want?

[N|ck]

id like to upgrade to a 10 switch box with individual corners pancake three wheel side to side and front to back. i will be buyin a pre-wired box but the rest i dont know how to do. i would like to replace all the wires that run from tha pumps and dumps and everythin in between.

Thanx N|ck

[N|ck]

tha dood i bought it from has it all jimmy rigged up tha anus. and im not even sure there hooked up right. and he has about a mile of electrical tape holdin it all together. so id like to replace it all.

[Guest_Hydros]

id like to upgrade to a 10 switch box with individual corners pancake three wheel side to side and front to back. i will be buyin a pre-wired box but the rest i dont know how to do. i would like to replace all the wires that run from tha pumps and dumps and everythin in between.

Thanx N|ck

Are you sure you only want two pumps for all that?  Can I talk you into four pumps?

This is going to be a project. I think I found a wiring diagrams on LIL someplace. I'll dig that URL up. They are for 3 and 4 pump set ups. Also I think one of the shops has diagrams info too.

If anyone has those URLs could you post that info?

[N|ck]

y cant i run 2 pumps? ive got another question. how r tha batterys sapose to be hooked up? parellel or series? mine r in a series and wouldnt that make them 48 volts? if im runnin 4 batts?



Thanx N|ck

[Guest_Hydros]

http://www.layitlow.com/tech.shtml

Try this for now

T

[Guest_hydros]

y cant i run 2 pumps? ive got another question. how r tha batterys sapose to be hooked up? parellel or series? mine r in a series and wouldnt that make them 48 volts? if im runnin 4 batts?



Thanx N|ck

Yes series is the way to go to get the voltage multiplied.  You would need a lot of valving to run just two pumps for the moves you want.

I was picking up used pumps for around 150. with all the valving. You'll get less ware, better action and less plumbing.

 

[N|ck]

thanx alot man that shit helped me out TONZ i know what im doin now and im jus gonna go wit 2 pumps for now and if i need to i will upgrade later. i dont plan on hoppi it i jus want them to work hassle free ya know im goin to hook them up 24 volts per pump not 48...... thanx again N|ck  

[NastyRedz]

You can run 1 pump with a manifold or 8 dumps. you can run 2 pumps  , 4 dumps each, you can run 4 pumps 4 dumps,  or 3 pumps  one dump on each of 2,, 4 dumps on 1,  any of these setups allow individual corners,    just do basic 2 pumps 4 dumps for now ,    

[NastyRedz]

i have 2 reds pumps and 4 dumps i jus bought a 90 b2200 and it came with them kinda instaled and they dont work but tha guy asured me that they do and i would like to re wire them but i dont know how. there r 6 selinoids 4 deep cycle batts 8 switches. i want to start from scratch on wireing so any help would be great...


Thanx N|ck

if your in ct bring it by my shop for a profesional install ,