|
Title: Charging with your alternator Post by: Hydros on March 06, 2004, 02:27:55 AM Using two batteries may not seem like a lot, but using a hi-torque motor or 6 volt motor will allow alot more improvement.
I have hopped 8" with just two batteries on a 12 volt motor and this was in the early 80's Title: Charging with your alternator Post by: Guest on July 23, 2004, 01:29:11 AM can you explain what type of 12-way switch you mean, and how it works?
Title: Charging with your alternator Post by: sixtyfourchevy on July 23, 2004, 01:33:33 AM Quote can you explain what type of 12-way switch you mean, and how it works? by how it works I mean, which points (on the diagram) are swtched (connected) to which, in either position. (and I assume it's a *click* type switch?) how many psitions? Title: Charging with your alternator Post by: Guest_Hydros on July 23, 2004, 12:44:30 PM Basically, it's four three way switches. You seen single and double switches, these are just four combined.
You could use two six ways, but you'd get all connections changed at the same time if you use a 12 way. Title: Charging with your alternator Post by: sixtyfourchevy on July 26, 2004, 01:02:50 AM Quote Basically, it's four three way switches. You seen single and double switches, these are just four combined. wouldn't that only give 12v power to the 3 way switch? You could use two six ways, but you'd get all connections changed at the same time if you use a 12 way. Title: Charging with your alternator Post by: Guest on July 29, 2004, 01:08:00 AM Quote Quote Basically, it's four three way switches. You seen single and double switches, these are just four combined. wouldn't that only give 12v power to the 3 way switch? You could use two six ways, but you'd get all connections changed at the same time if you use a 12 way. NOTES to Newbies: 24 volts at the switch is the way to go, even when the parts are made for 12 volts. But 12 volts does work if there are no extremes. Title: Charging with your alternator Post by: sixtyfourchevy on August 11, 2004, 10:57:11 PM ;) now if I could just find a switch that'd work............
Title: Charging with your alternator Post by: Guest_Hydros on August 12, 2004, 06:00:55 PM You may be able to use two sets of two way switches, with 8 contacts each. You would need to turn them on and off in a certain order. This might be easier to find in heavy duty, but would really mess (f**k) up your ride if you didn't switch then in the correct order.
|