|
Title: Just found some flaws in the saco and 3 ways to add a fast ground Post by: Hydros on March 30, 2013, 04:06:55 AM adding an ground terminal is questionable, if the brush plate itself is not securely grounded. Note on the image, if the inner casing is coated with an anti-rust solution, then there is the possibility of less than a 100% solid ground.
It may be best to solder the brush plate or use screws, washers and nuts to insure a 100% tight fit. Also, the 3 hold down holes would be ideal to attach a ground strap with a soldered on ground terminal. Title: Re: Just found some flaws in the saco and 3 ways to add a fast ground Post by: Hydros on November 02, 2013, 12:19:58 AM I am guessing all that chrome is not the best surface to transfer volts and amps
|